PocketBoom Rechargeable Bluetooth Portable Speaker – Review (@KitSoundUK)

I was recently sent the PocketBoom Rechargeable Bluetooth Portable Speaker for review from the guys over at KitSound.  This is one product I was looking forward to getting to grips with.  Check out the unboxing video below.

Setting the speaker up for use was an easy task.  simply power on the PocketBoom speaker and put your phone/device into visible mode.  Your device should pick up the speaker after a few seconds – once it has, choose the speaker from the list of available devices and it should pair up.  If you run into any issues when it comes to pairing the devices, check out the included user manual and you should be sorted in no time.

The sound that the PocketBoom pushes out is surprisingly awesome!  For such a small device, I was not expecting what I heard.  The speaker pushes out a decent amount of bass as well, but depending on what device you are using it with, you may want to adjust the levels on the device itself beforehand to get the best sound out of things – even if you download an equalizer app or something to help with this, it is definitely worth it.

Because the speaker also doubles up as a hands-free device, I was itching to try out both the incoming, and outgoing sound quality.  When a call comes through, simply press the little button on the top of the speaker (the one with the phone icon) and you will be connected.  Incoming call quality through the speaker was great quality and did not come through distorted at all – again, very surprised at the quality.  Outgoing voice was a little on the quiet side when listening through the phone, but I could still hear what was going on.  This was easily rectified by rotating the speaker a little so that the small microphone port was facing the person talking rather than facing the opposite way.

The small rubber section on the bass of the speaker provided a decent amount of grip when the speaker was placed on a surface.  Pressing the buttons, etc, did not cause the speaker to move about unnecessarily, something else that I really liked.  The overall design of the speaker is very easy on the eye and definitely something that you would not be embarrassed to be seen with.

Having the option to connect up a 3.5 to 3.5mm cable is handy, especially if you have been using the PocketBoom for a prolonged period of time via bluetooth and the battery is starting to get low – you can still use the speaker if you are not ready to power down just yet.  When it comes to recharging the speaker, simply connect up the Micro USB cable and plug in the other end of the cable to a PC or laptop, or even a USB mains adapter.  I have used the speaker and managed to get around 3 hours of continuous play from it before having to charge again.

This tiny speaker really does pack a punch when it comes to playing music.  No matter what style of music you choose to play, it comes through nice and clear, and with a decent amount of bass.  The hands-free feature just adds to this little box of awesome and makes using it an absolute pleasure.  You can pick up the PocketBoom Rechargeable Bluetooth Speaker in a wide range of colours and for the price of around £30.00 GBP.  An excellent product at an affordable price.

Advertisements

Razer Mamba 4G 2012 Gaming Mouse – Review (@Razer)

The more products from Razer that I use, the more I fall in love with them as a brand.  I have grown accustomed to the outstanding quality, ease of set-up and use, and the range of people that they cater for.

rz2

The moment I saw the packaging for the Mamba 4G 2012 gaming mouse, it was a pure ‘wow’ moment.  The mouse itself is presented in a transparent box packaging that shows off its beauty before you even touch the box.  The mouse is shown attached to a stand that allows you to see all angles of it.  The top right hand corner of the box is sporting the Razer logo, while the right top corner informs you that the Mamba is powered by the all new 4G Dual Sensor system.  The bottom half of the box is encased in a cardboard sleeve that you simply slide off to remove.

rz1

Getting into the box was a bit tricky for me.  I don’t have much strength in my hands so the fact that you have to press the two sides of the box together and pull out the top from the bottom before you can get into the box would have put a stop to things for me straightaway.  Luckily, I had my partner to open the box for me.  Once the top was separate from the bottom, gaining access to everything was pretty easy.  You simply unclip the mouse from the stand to remove it.  Looking around the back of the box, you are greeted with three cardboard drawers, as well as the standard  envelope that contains the Razer stickers and information.  The drawers themselves contained even more goodness.  The big drawer at the bottom of the three was housing the mouse charging dock.  The dock itself has the Razer logo, a sync button, and a space in the back to plug-in the cable.  Drawer number two contained the 1100 mAh battery, which provides around 12 hours of use once fully charged.  In with the battery you will also find the battery compartment cover for the base of the mouse.  Finally, in the last draw, is the braided Mini USB cable which you can use to connect the charging dock to the PC OR you can plug it directly into the mouse to make it wired – how amazing!  The mouse simply sits on top of the dock – it’s pretty simple and once in place, feels quite secure.

Setting the mouse up took only a few seconds.  Plug the dock into the PC and insert the battery into the mouse.  The battery may need charging before use, so maybe set it up a little while before you intend to use it, or use the USB cable.  Once plugged in and turned on, the RGB LEDs went to work and my gosh, they look amazing!  The dock lights up all around the base and the mouse lights up in unison.  The lights are fully customisable using the Razer Synapse 2.0 cloud software – you can also use the software to personalise your mouse DPI  (range of 100 to 6400), buttons and cursor settings – perfect for if you have different profiles for different people.  Also using the Synapse program, you can keep track of the battery power level and also calibrate the mouse to suit you.  Finally, the Mamba is sporting the new 4G sensor, which uses both a laser and an optical sensor, which when coupled with the ultra slick mouse feet, provides increased accuracy across a number of different surfaces.

rz3

After using the mouse as both a wired, and a wireless mouse, personally, I could tell no difference.  Both modes worked seamlessly well and having the option to go wired and wireless is definitely something that could come in handy.  The Mamba fits very nicely in the hand and access to all buttons (Left & Right, scroll wheel, two small buttons at the top of the left mouse button and two on the left side of the mouse) is easy and effortless.  It is very comfortable to use for both short and extended periods of time and for someone who gets sore hands from long sittings at the PC, I can honestly say that I encountered no discomfort.  The base of the mouse has the sensor, power button, sync button, an eject button for when the USB cable is attached, making it easier to remove, and of course, the battery compartment.

After having time to use the mouse for a number of activities, the ease of use with the Synapse 2.0 software, and also being able to sit back and watch the light show provided by the charging dock, I am very impressed with the Razer Mamba 4G mouse.  It is an absolute pleasure to use, no matter where you are or what surface you are using.  The option to have both a wired and wireless mouse is a nice touch and would suit any and every body.

rz4